Two-Drawer Solid Pine Nightstand with Metal Pulls

This nightstand is made from solid pine wood with a honey-colored stain and a matte varnish topcoat. Pine is a softwood, so the surface may dent more easily than hardwoods. The dimensions are 45 cm wide, 38 cm deep, and 60 cm high. The nightstand has two drawers stacked vertically. Each drawer features metal cup pulls in antique brass finish. The drawer boxes are constructed with glued and nailed joints (not dovetail). Each drawer runs on side-mounted metal ball-bearing slides rated for 10 kg capacity. The interior of each drawer measures 37 cm wide, 30 cm deep, and 11 cm high (top drawer) and 14 cm high (bottom drawer). The top panel is 1.8 cm thick and can hold up to 12 kg. Each drawer can hold up to 6 kg. The nightstand sits on four short legs (5 cm high) that are integrated into the side panels (non-detachable). Felt pads are pre-attached. Assembly required: the nightstand ships as a flat pack. You will need to assemble the side panels, back panel, drawer slides, and drawers using cam locks and screws. Assembly instructions and tools are included. Estimated assembly time: 40 minutes. The stain may have slight color variation between pieces due to natural wood absorption. The product includes a wall anchor strap for tip-over prevention (screws not included). To clean, wipe with a damp cloth and dry immediately. Avoid using harsh chemicals. The pine wood may develop a golden patina over time with light exposure, which is normal. The metal slides should be lubricated with a dry silicone spray if they become noisy. The nightstand is not suitable for heavy loads such as large collections of books. The top surface should not be used as a cutting board. The product is intended for indoor use in bedrooms. Do not place the nightstand in direct sunlight for prolonged periods to avoid uneven fading. The total weight of the nightstand is 11 kg.